。・ tutorial three, graphic tutorial one by graphictutorials ゜+.*-`. Hello everyone! In this tutorial

。・ tutorial three, graphic tutorial one by graphictutorials ゜+.*-`. Hello everyone! In this tutorial, I’ll teach you how do make a simple edit like the one below .’-1. Open Photoshop and create a new document, using the proportions you want.For this tutorial, I’ll be doing 800x500.1a. Using the paint bucket tool, fill the document with a solid color. I’ll be using white.2. Open the image you want and drag it over to the new document, and resize it if you need to.For this tutorial, I’ll be using this image.3. Create a new guide halfway through your new document.To do so, 3a. Go to View>New Guide3b. Select “Vertical” under the Orientation options3c. Enter the position, which would be half the size of the width of your new document. For example, if the width was 540px, you would enter 270 px. If the width was 500px, you would enter 250 px. Since I used 800px width, I would put in 400 px.Just figure out half of the size width you put. (Width/2=Position)3d. Click OK when you’re done.It should now have a line that goes through half-way, like so:4. Select the image layer, click the rectangular select tool, click and drag the select tool until half of the document is selected. You would do it to the smart guide you previously created.5. Once half of the image is selected, go to Edit>Cut. It should remove that half. Don’t worry, that is what it is supposed to do.6. Now go to Edit>Paste Special>Paste into Place. The half should now be put back into place, in a new layer separate from the other.Now you can remove the smart guide if you want. If you do, simply go to View>Clear Guides.I’ll be doing it, too. It’ll look back to normal, like so:7. Hide the half layer for now and click the text tool.8. Choose the font, text size, color, etc., then click on the document and enter the text you want on the side where the half would be.9. Unhide the half-image layer, and place that half layer above the text layer.For example, it’ll go from this:To this:10. Right-click on the half layer, and click “Create Clipping Mask." The layers should look like this:And the image should now be inside the text, like this:That’s basically all there is to it. You can customize as much as you want.You can enter a quote, like so:You can make a birthday edit, like so:Add a psd, like so:Change the background color, and add a text style, like so:Or, instead of having the text on one side, you can center it all together and it’ll look like this:Just change the text color and background color, and it should match.Anyways, I hope this tutorial/guide was helpful. If you need any help or have any questions, feel free to ask! -- source link

More pics about