themirroredmoon: ⋆☆⋆ Shower Steamers ⋆☆⋆Don’t have a bath and still want to relax? Want the sp

themirroredmoon: ⋆☆⋆ Shower Steamers ⋆☆⋆Don’t have a bath and still want to relax? Want the spa-like experience without the high costs? Want a lovely way to pamper yourself? Then go ahead and try out this DIY bath steamer recipe.Ingredients & Necessary Items: ❅ Silicone Mold ❅ Glass Bowl ❅ Whisk ❅ Measuring Utensils ❅ Face Mask❅ Baking Soda (8oz or 1cup)❅ Citric Acid (8oz or 1 cup)❅ Polysorbate 80 (Can also use Sorbitan Oleate)(2.5oz or 1/3 cup)❅ Essential Oils of Your Choosing (Minimum of 10 drops per scent, adjusted to your smell preference.)❅ A Colorant of Choice (Plant Power, Flower Dye, etc)❅ Dried Herbs and/or Flowers (Optional) ❅ Nitrile GlovesPrep Work: ❅ Grab your gloves and mask. It’s not the best to inhale the dry ingredients so a well ventilated space (at least a window open) is needed. Gloves are necessary because direct contact with the dry ingredients can cause dryness in skin or irritate it.Initial Instructions:❅ Mix your dry ingredients together (Baking Soda & Citric Acid) into a class bowl. I recommend sifting the Baking Soda into the Citric Acid as it will combine better. Stir with a whisk to further combine. Add in half of the herbs and/or flowers you think you’ll want. ❅ If you choose to have colored steamers, stir in the Flower or Plant Powder. If you don’t add in a colorant, they’ll be white and can still be really pretty. ❅ Mix the wet ingredients together (Polysorbate 80/Sorbitant Oleate and Essential Oils) until the Essential Oils blend evenly with  Polysorbate 80/Sorbitant Oleate. There should be little to no streaking of the Oils in the mixture. ❅Add the wet ingredients into the dry material little by little while mixing with a whisk. Once initially combined, begin to mix with your gloved hands, kneading until the liquids are nicely distributed. This mixture should have the consistency of wet sand– just moist enough to hold its shape when pressed together. ❅ Adjust mixture as neededSilicone Mold Usage: ❅ Add in herbs and/or flowers to mold before you add in mixture. Go lightly and be sure to avoid the edges of the mold. ❅ Fill the mold(s) with the mixture and press the mixture into the mold with your fingertips, paying attention to any edges in the mold. Fill and compress bit by bit until mold is completely full. Then take the bottom of something flat and hard (like a measuring cup) to further flatten and compress. ❅ Let dry overnight for a 24 hour period. Room temperature is OK and the mold can remain uncovered. Do not leave in a moist/humid area. ❅ Gently demold, tapping the mold to check if it sounds and feels solid. If so, continue with the demolding process. Very gently loosen the steamer from the mold by carefully pulling away the silicone while using your thumbs to gently push out the steamer.Notes:❅ Feel free to check out this post of mine for essential oil combinations to use. There’s more essential oils for those associations than I have in that post so if you have questions or want more options, feel free to ask. ❅ All ingredients can be found locally in grocery stores, in specialty shops or even online. -- source link

More pics about